Disassembly And Reassembly; Tools Used - Citizen CL-S300 Series Service Manual

Direct thermal barcode & label printer

Hide thumbs Also See for CL-S300 Series:

Table of Contents

CL-S300 Series Service Manual

DISASSEMBLY AND REASSEMBLY

Note the following items when performing maintenance of the printer.

 Do not disassemble, reassemble, or adjust the printer unnecessarily when the printer operation is

satisfactory.

 Do not loosen the screws that fasten the components unless it is absolutely necessary.

 After finishing inspection, perform a check to ensure that there is no irregularity before turning on the

printer.

 Use caution not to leave any part or screw used for maintenance inside of the printer.

 When handling the print head and electronic components, care must be taken to avoid static electricity.

 When disassembling or reassembling the printer, check the wires and cords for damage. Do not draw

any wire or cord by force.

 Lubricate the components as necessary when reassembling them.

2-1.

 Phillips screwdriver

 Flat head screwdriver

 Gloves

- 2 -

Table of Contents