Using The Appliance - Philips HC7650 User Manual

Optimizing the lifetime of the rechargeable battery

Using the appliance

Trimming with a trimming comb
2 Insert the small plug into the appliance and put
the supply unit in the wall socket.
When the appliance is charging, the battery
status indicator light flashes green.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
When you have charged the appliance for the first
time, we advise you to use it until the battery is
completely empty. Continue to use the appliance
until the motor almost stops operating during a
session. Then recharge the battery. Follow this
procedure at least twice a year.
The hair length settings are indicated in
millimeters. The settings correspond to the
remaining hair length after trimming.
Note: Be careful when you trim for the first time.
Do not move the trimmer too fast. Make smooth
and gentle movements.
Tip: Start trimming at a high length setting and
reduce the length setting gradually until you have
reached the desired hair length.
This appliance comes with 3 combs: a beard and
stubble comb (2 mm), a short comb (3 - 15 mm)
and a long comb (16 - 28 mm).
You can use the beard and stubble comb attached
to the cutting element to groom your beard and
moustache in your preferred style.
You can use the short and long combs to achieve
an even haircut.
9
English