Storage; Storage After Use - Echo CS-310 Operator's Manual

STORAGE

STORAGE

Storage After Use

• Inspect and adjust every part of the chain saw.
• Completely clean every part and repair if necessary.
• Apply thin coating of oil on metal parts to prevent rust.
• Remove chain and guide bar.
• Drain fuel tank completely. Press purge bulb 6 - 7 times to remove remaining fuel from carburetor then drain
the tank again. Close choke, start and run the engine until it stops due to lack of fuel.
• Allow engine to cool then remove the spark plug and pour 7 cm
oil into the cylinder through the spark plug hole.
• Store in a dry area, free from dust.
Do not store in an enclosure where fuel fumes may accumulate or reach an open flame or spark.
Do not lend or rent your chain saw without the included documentation.
Note:
• For future reference, you should keep all included documentation.
• If this documentation has become illegible or is lost, please contact your ECHO dealer, or go to
www.echo-usa.com.
38
3
(1/4 oz.) of fresh, clean, two-stroke engine
CS-310
X7503277900
©3/2020 ECHO Inc.