Running - Echo CS-310 Operator's Manual

OPERATION
1. Move chain brake lever fully FORWARD to LOCK chain brake
before starting.
2. Confirm there is fuel and chain oil in the tanks.
3. Move ignition switch UP to "RUN" position.
4. Securely hold the chain saw as shown and pull starter handle.
5. Choke may be used if necessary, but after first starting sound,
squeeze throttle trigger to release choke and return engine to idle.
Note: If engine does not start after 5 pulls, use cold start procedure.
Note: Do not increase engine speed while chain brake is locked.
Severe brake damage will result.

Running

The saw chain should not move at idle, otherwise serious personal injury may result.
Note: If saw chain moves adjust carburetor according to "Carburetor Adjustment" instructions in this
manual, or see your dealer.
22
CS-310
Chain brake
A
X7503277900
©3/2020 ECHO Inc.