Traulsen TR35832 Specification Sheet

Project
Model Specified:
"D-Width" Hinged Glass Door Reach-In Re-
frigerators/Self-Contained
®
INTELA-TRAUL
Equipped!
Model RHT132DUT-HHG
(shown with optional interior arrangements & casters)
Standard Product Features
• R-Series: Stainless Steel Exterior & Interior
• A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
• INTELA-TRAUL ® Microprocessor Control System
• Balanced, Self-Contained Refrigeration System Using R-134a
• Scroll Blower Type Evaporator Fan
• Biased Return Air Duct
• Full or Half Length Hinged Glass Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Stainless Steel Vertical Door Handle(s)
• Standard Door Hinging: 132D = Right, 232D = Left/Right,
(other hingings not available for two-section models)
• Incandescent Lights With Exterior Switch
• Stainless Steel Breaker Caps
• Three Chrome Plated Adjustable Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
• Automatic Non-Electric Condensate Evaporator
• Magnetic Snap-In Door Gaskets
• Controllable Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached
• Set of Four (4) 6" High Adjustable Stainless Steel Legs
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
• Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Quantity
One & Two Section Models, 32" Deep
1-Section Full Length Door Model
R
2-Section Full Length Door Model
1-Section Half Length Door Model
SERIES
2-Section Half Length Door Model
Stainless Exterior
& Interior
1-Section Full Length Door Model
A
2-Section Full Length Door Model
1-Section Half Length Door Model
SERIES
2-Section Half Length Door Model
Stainless Exterior,
Anodized
Aluminum Interior
The R & A Series represent Traulsen's Top-of-the-Line product offering. These
"D-Width" reach-in refrigerator models are equipped with hinged glass doors
in order to maximize product visibility. Each is supplied standard with such
high quality features as balanced refrigeration systems, microprocessor
controls, communications ability and stainless steel exteriors. Additionally,
they offer the widest range of optional accessories to choose from, and can
be specified for use with many different applications, including: Foodservice,
Correctional, Institutional, Export, etc.
Options & Accessories
• Stainless Steel Finished Back With Rear Louvers
• Fluorescent Lights
• No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C. (see notes
below)
• No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C. (see notes below)
• Re-Hinging Feature For Door(s)
• Additional Chrome Plated Shelves
• Export 220/50/1 Voltage
• 208/115/60/1 Voltage In Lieu Of Standard 115/60/1
• Stainless Steel Shelves In Lieu of Standard Chrome Plated
• Kool Klad Exterior Laminate Decor
• Set of Four (4) 6" High Casters In Lieu of Legs
• Set of Four (4) 4-5/8" High Casters In Lieu of Legs
• 4-1/2" High Stainless Steel Base In Lieu of Legs
• 6" High Stainless Steel Kickplate (for use with standard legs)
• Remote Applications (see spec sheet 12-2 for more details)
• Two Year Service/Labor Warranty Available
Please Note: Tray slides are not available for these models
when ordered with optional fluorescent lighting.
NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.
Approval: ___________________________________
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
CSI Section 11400
RHT132DUT-FHG
RHT232DUT-FHG
RHT132DUT-HHG
RHT232DUT-HHG
AHT132DUT-FHG
AHT232DUT-FHG
AHT132DUT-HHG
AHT232DUT-HHG
SECTION
11-6