Calibration Settings - Blaupunkt DX-V Operating Instructions Manual

System settings

Calibration settings

1. Mark on the top line of the "Settings" menu. Press
The sub-menu for calibration will appear.
Calibration after changing the tyres
When the car tyres are changed, from summer to winter tyres for example, it might be
necessary to calibrate the TravelPilot DX-V again.
1. Select "Tyre change". Press
A warning note will appear.
2. If you want to calibrate the system, select "Continue" and press
As soon as you begin driving, the TravelPilot DX-V will begin to update the
calibration information stored.
This process is displayed in a status window.
Installing the system again
If the TravelPilot DX-V is installed in a different vehicle, the entire calibration process
must be performed again.
1. Select "New installation". Press
A warning note will appear.
2. If you want to recalibrate the system, select "Continue" and press the
button.
OK
All the calibration data are deleted.
3. As soon as you begin driving, the TravelPilot will begin to calibrate the sys-
tem.
This process is displayed in a status window.
Allgemeines Kurzanlei-
OK
.
OK
.
OK
Zieleingabe Touren
.
.
OK
Zielspeicher Einstellun-
67
Anhang