Saving A Station; Saving A Station Automatically (Travelstore); Going To A Preset Station; Scanning Through Available Stations (Scan) - Blaupunkt C31 Operating Instructions Manual

Saving a Station

Saving a Station Manually
Choose between memory levels
FM1, FM2, FMT or the AM wave-
band.
Tune to the station you want.
Choose one of the station buttons
1-5 > on which you want to store
the station, and hold it pressed for
longer than one second.
Saving a Station Automatically
(Travelstore)
You can also save the five strongest sta-
tions in the area automatically. This is
done in the FMT or AM memory level,
depending on your chosen waveband.
Note:
Any stations previously saved on
this level will be deleted.
Briefly press the TS button 3.
Storing starts. "T-STORE" appears in the
display. When the procedure is com-
plete, the station in memory location 1
of the memory level in question is
played.

Going to a Preset Station

Select the memory level where the
station is stored.
Press the corresponding button 1-5
>.
RADIO OPERATION
Scanning through Available
Stations (SCAN)
You can listen to short samples from all
the stations that can currently be re-
ceived. The length of the samples can
be set, in the menu, to between 5 and
30 seconds.
Starting SCAN
Hold down the SCAN button 4.
The scanning process starts. "SCAN"
appears briefly in the display, after which
the current frequency is displayed, flash-
ing.
Stop SCAN, continue listening to a
station
Press the SCAN button 4 again.
The scanning process is stopped, and
the last set station remains active.

Setting Scan Time

Press the MENU button =.
Press the or
"SCANTIME" appears in the dis-
play.
Set the desired sampling time with
buttons <.
the
When the setting process is complete,
press the MENU button =.
Note:
The chosen sampling time also ap-
plies to CD-changer scans.
button < until
11