RADIO OPERATION
Radio Operation
Switching on Radio Operation
If the current operating mode is cas-
sette, CD-changer or AUX
Press the BAND button 2.
or
Press the CD•C button : until
"RADIO" appears in the display.
Select Waveband/Memory Level
This radio receives stations in the FM
and AM wavebands. Three memory lev-
els are available for the FM waveband,
and one memory level for the AM wave-
band. Each memory level can be used
to store five stations.
Selecting FM Memory Level
To switch between the FM memory lev-
els FM1, FM2 and FMT
press the BAND button 2.
Selecting AM waveband
To select the AM waveband
press the BAND button 2 until
"AM" appears in the display.
10
Setting the Station
There are a number of ways to set the
station.
Automatic Station Search
Press the
or
The next station that can be received is
tuned in.
Adjusting Station Search
Sensitivity
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
Press the MENU button =.
Press the
or
"SENS HI" or "SENS LO" appears
in the display.
"SENS HI" means maximum sensitivi-
ty, "SENS LO" means minimum sensi-
tivity. When "SENS LO" is selected, the
display shows "lo".
Set the desired sensitivity with the
buttons <.
When the setting procedure is complete,
press the MENU button =.
Manual Station Tuning
You can also tune to the station manu-
ally.
Press the
or
button <.
button < until
button <.