Residual Risks; Risk Reduction; Symbols On The Product - Ryobi RHT1855Li25 Original Instructions Manual

WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only. When servicing, use only original
replacement parts.
WARNING
The blades are extremely sharp. To prevent personal
injury, exercise extreme caution when cleaning,
lubricating, and fitting or removing the blade cover.
■ Remove the battery before adjusting, maintaining, or
cleaning the product.
■ You may make adjustments and repairs described in
this manual. For other repairs, contact the authorised
service agent.
■ After each use, clean the body and handles of the
product with a soft, dry cloth.
■ After each use, clean the debris from the blades
with a stiff brush, and then carefully apply a rust
preventative lubricant before refitting the blade
cover. The manufacturer recommends you to use a
rust-preventative lubricant spray to apply an even
distribution and reduce the risk of personal injury from
contact with the blades. For information about suitable
spray product, check with an authorised service centre.
■ Lubricate the blades lightly before use if necessary
using the above method.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorized service
centre.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■ injury caused by contact with the cutting means
– The blade cannot be guarded while cutting. Keep
the blade away from yourself and others. Cover it
with the blade protector when the product is not in
use.
■ injury caused by vibration
– Always use the right tool for the job, use designated
handles, and restrict working time and exposure.
■ hearing damage caused by exposure to noise
– Wear hearing protection and limit exposure.

RISK REDUCTION

It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness, and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
4
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
WHAT'S IN THE BOX
See page 6.
■ Hedge trigger x 1
■ Blade cover x 1
■ HEDGESWEEP debris sweeper x 1
■ Operator's manual x 1
■ Charger (sold separately for OHT1855R) x 1
■ Battery (sold separately for OHT1855R) x 1

SYMBOLS ON THE PRODUCT

Safety alert
Please read the instructions carefully
before starting the product.
Wear ear protection.
Wear eye protection.
Always hold the hedge trimmer with
both hands when operating.
Wear non-slip, heavy duty gloves.
To prevent serious injury, do not touch
cutting blades.
Do not expose to rain or damp condition.