Changing the light bulb
Detach the monitor from the ceiling
plate (4 screws).
Screws for securing the
ceiling-mounted monitor
Remove the 3 screws of the metal
cover (see picture below).
Take out the old bulb.
Fit a new bulb (12 V, 3 W).
Refit the monitor.
Metal cover
Light bulb specifications
Diameter: 8 mm
Length:
Voltage: 12 V, 3 W
Changing the battery in the
remote control
Bulb
OPERATION
28 mm
Push the button on the battery
compartment J to the right (see A
below).
Pull the battery compartment J
out of the remote control (see B
below).
Change the 3 V battery (CR 2025).
A
J
B
27