Hide thumbs Also See for NT9145:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

ENglish

1

Rinse the precision trimming head, the precision trimming combs and
the precision shaving head with lukewarm water.
Note: You can also use the cleaning brush to clean the precision trimming head,
the precision trimming combs and the precision shaving head.

Let all parts dry completely before you use the appliance again.
Ordering accessories
If the combs are damaged or worn, always replace them with original
Philips combs. If the cutting element of the precision trimming head or
precision shaving head is damaged or worn, replace it.
To buy accessories or spare parts, visit www.shop.philips.com/service or
go to your Philips dealer. You can also contact the Philips Consumer Care
Centre in your country (see the worldwide guarantee leaflet for contact
details).
Environment
-
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
-
Batteries contain substances that may pollute the environment. Remove
the battery when it is empty or when you discard the appliance. Do
not throw away the battery with the normal household waste, but
hand it in at an official collection point.
guarantee and support
If you need information or support, please visit the Philips website at
www.philips.com/support or read the worldwide guarantee leaflet.
guarantee restrictions
Cutting units are not covered by the terms of the international guarantee
because they are subject to wear.
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Centre in your
country.
Problem
Cause
The appliance does
The hairs are too long.
not shave long hairs.
The appliance does
Hairs may be stuck in
not work as well as
the precision trimming
it should.
head or precision
shaving head.
The appliance pulls
You move the appliance
at the hairs.
too fast.
The disposable battery
is empty.
The appliance works,
You press the appliance
but the result is
onto the skin too hard.
uneven.
The precision trimming
comb is not in full
contact with the skin.
The appliance does
The disposable battery
not work.
is empty or has been
inserted incorrectly.
ENglish
Solution
Pre-trim long hairs with the precision trimming head
and move the appliance against the direction of hair
growth. Make sure that the appliance is fully in contact
with the skin.
Clean the precision trimming head or the precision
shaving head (see chapter 'Cleaning').
Do not move the appliance too fast.
Insert a new battery.
Do not press the appliance onto the skin too hard,
as this may cause the hair length after trimming to be
shorter than the indicated hair lengths.
When you use one of the combs, always make sure it
is fully in contact with the skin.
Always move the appliance against the direction
of hair growth. As not all hairs grow in the same
direction, this means that you have to move the
appliance up, down and sideways.
Replace the battery or insert it correctly.
1

Advertisement

Table of Contents
loading

Table of Contents