Home Leave Operation - Daikin FTXS18DVJU Operation Manual

HOME LEAVE Operation

HOME LEAVE operation is a function which allows you to
record your preferred temperature and airflow rate settings.
I To start HOME LEAVE
operation
1. Press "HOME LEAVE button" .
• The HOME LEAVE lamp lights up.
I To cancel HOME LEAVE operation
2. Press "HOME LEAVE button" again.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
I I I I To set the temperature and airflow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and airflow
rate for HOME LEAVE operation. Record your preferred temperature and airflow rate.
temperature
Cooling
Heating
1. Press "HOME LEAVE button". Make sure "
controller display.
2. Adjust the set temperature with "
3. Adjust the airflow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change the
recorded information, repeat steps 1 – 3.
16
Initial setting
Airflow rate
77°F AUTO
77°F AUTO
HOME LEAVE
Selectable range
temperature
64-90°F 5 step, AUTO and SILENT
50-86°F 5 step, AUTO and SILENT
" is displayed in the remote
" or " " as you like.
F
F
ON/OFF
TEMP
POWERFUL
MODE FAN
SILENT SENSOR SWING
ON CANCEL
OFF
TIMER
Airflow rate
1, 2
IEnglish