Table of Contents
Advertisement
TL-WN610G/TL-WN650G/TL-WN651G
the General tab. Fill in the Profile name and click OK to create the configuration
profile for that network.
3.2.7 Auto Profile Selection Management
The auto selection feature allows the wireless adapter to automatically select a profile
from the list of profiles and use it to connect to the network. To add a new profile into the
Auto Selected Profiles list, please follow these steps.
1.
On the Profile Management tab, click Order Profiles....
2.
The Auto Profiles Selection management window will appear, with a list of all created
profiles in the Available Profiles box.
3.
Highlight the profiles to add to auto profile selection, and click Add. The profile will
appear in the Auto Selected Profiles box.
4.
Highlight a profile in the Auto Selected Profiles box.
5.
Click Move Up or Move Down as appropriate. Note: The first profile in the Auto
Selected Profiles box has highest priority, and the last profile has lowest priority.
6.
Click OK.
7.
Check the Auto Select Profiles checkbox on the Profile Management tab.
Note: When auto profile selection is enabled by checking Auto Select Profiles on the
Profile Management tab, the client adapter will scan for an available network. The profile
with the highest priority and the same SSID as one of the found networks will be used to
connect to the network. If the connection fails, the client adapter will try the next highest
priority profile that matches the SSID until an available network is found.
Figure 3-10 Scan Available Networks Dialog
- 16 -
108M Wireless Adapter User Guide
Advertisement
Table of Contents
