Scan Available Networks; Auto Profile Selection Management - TP-Link TL-WN510G User Manual

TL-WN510G/TL-WN550G/TL-WN551G

3.2.6 Scan Available Networks

1. Click Scan on the Profile Management, the Available Infrastructure and Ad Hoc
Networks window will appear (shown in Figure 3-10).
2. Click Refresh to refresh the list at any time.
3. Highlight a network name and click Activate to connect an available network. If no
configuration profile exists for that network, the Profile Management window will open
the General tab. Fill in the Profile name and click OK to create the configuration
profile for that network.

3.2.7 Auto Profile Selection Management

The auto selection feature allows the wireless adapter to automatically select a profile
from the list of profiles and use it to connect to the network. To add a new profile into the
Auto Selected Profiles list, please follow these steps.
1. On the Profile Management tab, click Order Profiles....
2. The Auto Profiles Selection management window with a list of all created profiles in
the Available Profiles box will appear (shown in Figure 3-11).
3. Highlight the profiles to add to auto profile selection, and click Add. The profile will
appear in the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down as appropriate. Note: The first profile in the Auto
Selected Profiles box has highest priority, and the last profile has lowest priority.
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab.
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with
the highest priority and the same SSID as one of the found networks will be used to
54M Wireless Adapter User Guide
Figure 3-10
19