Husqvarna 543 XP Workshop Manual page 57

10
Fit the piston assembly tool (against rotation). Use
the crankshaft assembly tool 502 50 30-22 and pull
the crankshaft into the MAG side of the crankcase.
Se figure 76.
11
Fix the six crankcase bolts. Tighten them alternate-
ly. Tightening torque 6,9 - 8,8 Nm. See figure 77.
12
Refit remaining parts.
NOTE!
Take care to prevent any dirt and foreign
particles from entering the crankcase.
Fig 76
Fig 77
Repair Instructions
x5
x1
57
English -