Panasonic CF-19ADUAX M Series Service Manual page 57

7.2.12. Setting the Audio PCB and RF-IF
PCB and BT PCB
1. Connect the FFC(Audio) to the Connector. (CN901)
2. Fix the Audio PCB using the 3 Screws. <N41>
Audio PCB
3. Fix the RF-BT Plate to the RF-IF PCB using the 4 Screws
<N19>.
4. Fix the BT PCB to the RF-BT Plate using the 2 Screws
<N19>.
5. Connect the FFC(BT) to the Connector. (CN2)
6. Connect the FFC(BT) to the Connector. (CN604)
7. Attach the Antenna Cable(blue) to the Clamper.
<N19>:No.6
Connector(CN2)
Antenna Cable(blue)
RF-IF PCB
<N19>:No.3
<N19>:No.4
8. Fix the RF-IF PCB Ass'y using the 3 Screws. <N41>
9. Connect the FPC(HSDPA) to the Connector. (CN16,
CN600)
10. Connect the Antenna Cable(black) and Cable(green) to
the connector (JK601, Jk600) .
<N41>:No.1
<N41>:No.2
<N41>:No.3
Connector(CN901)
FFC(Audio)
<N19>:No.5
BT PCB
Connector(JK1)
FFC(BT)
RF-BT Plate
Connector(CN604)
<N19>:No.2
<N19>
Clamper
:No.1
11. Attach the Cable Hold Sheet.
<N41>:No.1
<N41>:No.3
<N41>:No.2
RF-IF PCB
Note:
Tighten the Screws in the numbered order (No1 to No3).
Tighten the Screws in the numbered order (No1 to No6).
Tighten the Screws in the numbered order (No1 to No3).
Screws <N19> : XSB2+3FNL
Screws <N41> : XSB2+5FNL
7-35
Antenna Cable(green)
Antenna Cable(black)
Connector(JK601)
Connector(JK600)
Connector(CN600)
FPC(HSDPA)
Cable Hold Sheet
Connector(CN16)