BLOWER AND FAN SERVICE (Cont'd.)
4. Remove 4 Phillips head screws that
mount plastic housing sides to coil hous-
ing.
5. Remove 4 Phillips head screws that
mount coil housing to bracket.
INSIDE FAN MOTOR
4. Remove 4 Phillips head screws that
mount motor to fan bracket.
NOTE: In order to service inside blower/outside
fan and motors, you will have to disassemble to
this point. Both blower/fan are mounted with a
5/16" nut.
5/16" NUT
OUTSIDE FAN
MOTOR
REMOVE SIDES
REMOVE COIL HOUSING
REMOVE OUTSIDE FAN BLADE
7