Blaupunkt RDM 127 Operating Instructions Manual page 42

Repeating a track (REPEAT)
You can repeat any track on the CD (continuously). The REPEAT function is
active if REPEAT is highlighted in the display.
Switching REPEAT on/off:
• Press REPEAT.
TPM
Track Programme Memory
To store and play back favourite CD tracks.
It is possible to catalogue up to 99 CDs with a maximum of 20 tracks.
Storing a track with TPM
The TPM function must be switched off (TPM is not highlighted in the display).
If necessary,
• switch TPM on/off by pressing
• Select the track by pressing
play header.
• Press TPM until you hear a beep.
The track has been stored. TPM PROGRAMMED will appear in the display head-
er.
Select the next track and store it by pressing
You can store tracks at any time while they are being played, but both TPM and
SCAN must be switched off.
TPM.
/ . The track number will appear in the dis-
TPM etc., as described above.
S
02:44 TR 08
MIX CD NAME
SCAN
REPEAT
TPM
TPM CLR
S
TPM PROGRAMMED
MIX CD NAME
SCAN
REPEAT
TPM
TPM CLR
42