Attaching The Blades - Multitech MultiConnect MTPCIE-H5 Series Developer's Manual

Power
Supply no
blades

Attaching the Blades

To attach a power supply blade:
1. Remove the power supply cover (not shown). To do this, slide the lock down and hold it while you lift off
the cover.
2. Insert the latch on the blade into the notch on the power supply.
3. Slide the lock down and hold it while you press the blade in place. Then, release it.
®
MultiConnect PCIe MTPCIE-H5/MTPCIE-BW Developer Guide
Power
Power Supply
Supply with
EU blade
1 - Latch
2 - Notch
3 - Sliding lock
DEVELOPER BOARD AND SCHEMATICS
with NAM
Supply with
blade
Power
UK blade
Supply with
AU-NZ blade
Power
35