Invacare MK5 NX Service Manual page 38

SECTION 9—DIAGNOSTIC CODES
7 E07 Remote Fault
8 E08 Controller Fault
9 E09 Communications
Fault
10 E10 General Fault
11 E11 Incompatible/
incorrect Remote
MK ™NX™Electronics
5
00 Local SR Fault (CPU,
EEPROM, etc.)
01 Joystick fault at the remote
02 Speed pot fault at the remote
00 Controller fault
01 RAM fault
02 ROM fault
03 CPU fault
04 EEPROM fault
05 Watchdog fault
06 Stack fault
07 Software fault
08 Power-up testing fault
09 Relay fault or precharge fault
10 Bridge fault or disable all fault
11 Electronics fault: Thermistor
12 Calibration setting fault
00 Remote connection lost
01 Low communication mode
00 General fault
00 Incompatible/incorrect
Remote
38
Check the communications bus, connec-
tions and wiring. Replace the remote.
Check connections and wiring. Replace
power module.
Check connections and wiring. Replace
Bus cable.
Check all connections and wiring. Contact
Invacare Technical Service.
Wrong type of remote connected. Ensure
the branding of the joystick matches that
of controller unit.
Part No 1110532