Toshiba MD14F12 Owner's Manual page 42

Function setup
Customizing the function settings (Continued)
Setting details
Parental control setting
Some discs are specified as not suitable for children.
Such discs can be limited not to playback with the unit.
1) Press or to select "Parental", then press
until the parental level you require to appear.
• Level Off: The parental control setting does not
function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press or to select "Password".
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CANCEL.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can
not be changed unless you enter the correct
password.
4) Press OPEN/CLOSE to activate Parental control
setting. (See "Temporary cancel the rating level
by DVD disc" "! .)
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
42
5W30201A [E] (P38-43)
Password ----
Parental Off
/0Ð9/Enter/Cancel/Setup/Return
or
42
To change the parental level
1) Press or to select "Password".
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press or to select "Parental", then press
to change the parental level.
5) Press or to select "Password", then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password.
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
"No Disc" appears on the screen.
4. Press and hold STOP on the front panel, and at the
same time press 7 on the remote control until
"PASSWORD CLEAR" appears on the screen.
5. Enter a new password again.
Note:
" ~ "
If each setup has completed, the unit can always
work under the same condition (especially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
7/1/06, 4:51 PM
or