Voice Mail Call Monitor - Toshiba Strata DKT User Manual

Advanced Operation

Voice Mail Call Monitor

Voice Mail Call Monitor
Important!
Using the flexible
while the caller records a message in your voice mailbox. You can also answer the call
while the message is being recorded. When the call is picked up the message
recording stops.
To enable and disable Call Monitor on your telephone
1. While on hook, press the idle Call Monitor button. You hear the voice prompt
"Enter your security code."
2. Enter your voicemail password (maximum of 16 digits; numbers 0~9). LCD
displays "Talk to xxx," where xxx = voice mail port DN.
3. Press
You'll hear the voice prompt "Call Monitor Enabled." The LCD now displays
"Logged into VM" briefly and then displays the original information.
The Call Monitor LED light turns solid green.
Press the
will turn off.
To monitor a call using Call Monitor
1. The flashing green Call Monitor button indicates that a message is being recorded
in voice mail.
2. Using the speakerphone, press the Call Monitor button. The Call Monitor LED
flashes red. You can hear the caller leaving the message, but the caller cannot hear
you.
The LCD displays "Monitoring VM xxx," where xxx = Caller's DN.
3. To talk to the caller, press the Call Monitor button again (The LED changes from
flashing Red to solid Green).
The LCD display indicates the extension or line connection.
74
To see how this feature interacts with other FeatureFlex features, refer
to Appendix C – FeatureFlex
Call Monitor
#
.
Call Monitor
button to disable Call Monitor. The Call Monitor LED
Interactions.
button on your telephone, you can listen to a caller
Strata CIX and CTX IPT/DKT Telephone 11/05