Message Waiting Light on [PhDN/MW]
➤
To respond to [PhDN/MW]
1. Press the flashing red
[PhDN/MW] LED.
2. After receiving the
message, press
...or place the handset
on-hook.
➤
To cancel [PhDN/MW]
1. Press [PhDN].
2. Enter
3. Press
Message Waiting Light on Another Telephone
➤
To set a message waiting light on another telephone
1. Press [DN] and dial
an internal number.
2. Press
Strata DK Digital Telephone 6/00
Your phone rings the station or voice mail device that
left the message. If the called party or VM device
answers, the message waiting indication is cancelled
automatically. If there is no answer, hang up and try at
a later time. The red
[PhDN/MW] LED on your phone continues to flash.
If you have more messages, the red [PhDN/MW] LED
continues to flash. To answer the next message, repeat
this procedure.
You hear a steady dial tone.
.
The dial tone stops.
.
The [PhDN/MW] LED turns OFF, indicating that the
message has been canceled.
You hear ringback or busy tone.
or .
The Msg or PhDN/MW] LED
flashes red at the called
telephone. The Msg LED
lights steady red at your
telephone. The LCD displays
the station [203] where you
set a message waiting light.
Features
Message Waiting
NO. 201
INT 203 MW SET
59