Automatic Hold - Toshiba Strata DK 2000-series User Manual

Features

Automatic Hold

4. Answer within three
rings to prevent the
callback from being
cancelled.
5. If you were
attempting to make an
outside call and did
not use LCR, you
must now redial the
telephone number.
➤
To cancel ACB (to busy or DND station)
➤
Press
Automatic Hold
Automatic Hold enables you to automatically place a call on hold by pressing another
outside
between calls without having to press
this feature, otherwise existing calls drop if you do not press
or making another call.
➤
To use Automatic Hold
➤
While on a call, press another
LED of the accessed line flashes (in-use). The first call is put on hold and the LED
flashes (on-hold).
➤
To switch between calls
➤
Press
use). The LED of the Line or [DN] placed on hold flashes (on-hold).
26
After you answer, you hear a single tone, and the LED
flashes green (in-use).
If you hear a busy tone after answering a callback, the
called party is already on another call or the line has
already been seized or has received an incoming call.
Your request is not cancelled. You will be called again
the next time a line becomes idle.
If the original call was made using LCR, the telephone
number is automatically dialed.
or [DN] +
or a [DN] button—there is no need to press
or [DN] of the held call. The LED of the line just accessed flashes (in-
.
. Your telephone must be programmed for
or [DN] to receive/originate a new call. The
Strata DK Digital Telephone 6/00
. You can also switch
before answering