Hygiene Info (Cleaning The Drum); Cleaning The Water Inlet Filter - Miele WWG 660 Operating Instructions Manual

Cleaning and care
Hygiene info
(Cleaning the drum)
Washing at low temperatures and/or
using liquid detergents can cause
bacteria and odours to build up in the
washing machine. Use the Clean
machine to clean the washing machine.
Run this programme regularly or at the
latest when the Hygiene info: Run a
programme at min. 75°C or "Clean
machine'" programme
in the display.

Cleaning the water inlet filter

The washing machine has 2 filters to
protect the inlet valve. Check these
filters every 6 months or so. Perform
this check more often if there are
frequent interruptions to the external
water supply.
Cleaning the filter in the inlet hose
 First turn off the tap.
 Unscrew the inlet hose.
 Remove the rubber seal 1 from the
recess.
62
message appears
 Using pointed pliers, take hold of the
plastic filter bar 2 and remove the
plastic filter.
 Clean the filter.
 Reassemble the filter and seal in the
reverse order and reconnect the
hose.
Cleaning the filter in the inlet valve
 Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew it.
 Use pointed pliers to withdraw the
plastic filter by the bar.
 Clean the filter.
 Reassemble the filter and seal in the
reverse order and reconnect the
hose.
The filters must be put back in place
after cleaning.
 Turn on the tap.
Make sure there is no water leaking
from the connections.