Starting The Calibration Programme - Miele WWG 660 Operating Instructions Manual

5. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open  and run 'Cottons' 90°C without
laundry
 Touch the  sensor until the
OK sensor lights up and confirm with
OK.
 
90° 1400
 
 Turn on the tap.
 Touch the Start/Add laundry sensor.
The calibration programme will start. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:

Set up completed
Before using for the first time
 Take hold of the door and pull it
Useful tip: For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
1:55
OK
 Turn the programme selector to the
open.
 position.
23