Call Park Orbits - Toshiba CT User Manual

Call Park Orbits

The Call Park feature enables you to hold a call temporarily in an orbit (the area where the call
is held). Anyone can retrieve the call from the orbit using the same or a different station. There
are 20 General Park Orbits for the system and 1 Personal Park Orbit for each station.
Once you have parked a call in an orbit, you can:
Hang up and retrieve the parked call at a later time
Originate another call
Access a voice paging device to announce the parked call for pickup from another station
If you park a call and it is not retrieved the following occurs:
If your station is idle when the system Call Park recall timer expires, the parked call
automatically recalls to your station.
If your station is busy, the parked call camps-on.
If you have an LCD telephone, you can let the system automatically select an available orbit
number which displays on your LCD. To monitor the calls parked at your station, see
Park Orbit List Display"
To park a call
1. While on a call, press
...or
2. Enter a General Orbit
Number (
or a valid [PDN]
...or if you have an
LCD, press
3. Hang up.
Strata DK Digital Telephone 5/99
in Chapter 3 – LCD
The LED flashes green (consultation-
hold).
+
.
The call is parked and the CO line
~ ) flashes (Hold), or the [DN] LED turns
OFF.
The system parks the call on the lowest vacant Orbit Number.
.
The caller's extension or Line number
and the orbit number are shown.
If the parked call is not retrieved
within a specified time, the call rings
back to your phone.
Operation.
Features
Call Park Orbits
"Call
ENTER ORBIT NO
RTRN
6793 PK ORBIT 900
LN 2 ORBIT 900
31