Programmed Playback; Programmed Playback With Audio Cd, Mp3; Jpeg And Wma Discs; Programmed Playback With Video Cd - Toshiba SD-V390-S-TU Owner's Manual

Programmed Playback

Programmed Playback with
Audio CD, MP3, JPEG or WMA
Disc
CD MP3
Program allows you to store your favorite tracks/files
(or files) for a particular disc in the player memory.
Program can contain 32 tracks (Audio CD/Video CD) or
60 tracks (MP3/JPEG/WMA disc).
1
Insert a disc and close the tray.
• The Audio CD menu appears.
• If MP3, JPEG or WMA disc is inserted, the
MP3/JPEG/WMA choice menu appears on the TV
screen.
v V
Press / to select the MP3, JPEG or WMA then
press ENTER. The MP3, JPEG or WMA menu
appears on the TV screen. Press RETURN to
move to the previous menu (MP3/JPEG/WMA
choice menu).
2
Press PROGRAM in the stop mode or during
playback (Audio CD, MP3 and WMA only) to
enter the Program Edit mode.
The E mark will appear to the right of the word Program
on the right side of the menu screen.
Note
Press PROGRAM to exit the Program Edit mode;
the mark will disappear.
E
v V
3
Press / to select a track/file then press
ENTER to place the selected track/file on the
Program list.
4
Repeat step 3 to place additional tracks/files on
the Program list.
CD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
0:56:35
For example: Audio CD menu
B
5
Press .
The programmed track/file you selected last is highlighted
on the program list.
v V
6
Press / to select the track/file you want to
start playing.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
7
Press ENTER or PLAY to start.
Playback begins in the order in which you programmed the
tracks/files and "PROG." appears in the display window.
Playback stops after playing the last programmed track/file
on the program list.
Note
The programmed tracks/files are cleared when the
power is turned off or the disc is removed.
CD MP3
JPEG WMA
Program
E
TRACK 12
TRACK 8
TRACK 10
TRACK 3
Clear All
STER. NORM.
VCD2.0
JPEG WMA
Programmed Playback with
Video CD
VCD2.0
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 20.
1
Insert Video CD and close the tray.
2
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
VCD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Note
Press RETURN or PROGRAM to exit the Program menu.
3
Follow steps 3-7 of "Programmed Playback with
Audio CD, MP3, JPEG or WMA Disc" on left.
Tip
To resume normal playback from programmed
playback
Press and hold PROGRAM for 3 seconds until "PROG."
indicator disappears in the display window.
1-85
VCD1.1
VCD1.1
Program
E
Clear All