1600Vi Specifications - Bose 1600VI Service Manual

Size:
Weight:
Display:
Operating Temperature:
Continuous Average Output Power,
both channels driven:
Bridged Mono Operation:
Voltage Output:
Dynamic Headroom:
Power Bandwidth:
Frequency Response:
Channel Separation:
Input Impedance:
*Sensitivity:
*Gain:
*The amplifier sensitivity is set to 0.775V rms for rated output. To reduce the sensitivity by 6 dB to
1.5V rms, remove JP100 (CH1) and JP200 (CH2), located on the main amplifier board.

1600VI SPECIFICATIONS

Performance Specifications
High: 0.775 Vrms for rated power into 4 Ohms,
Low:
High: 33.3 dB (±0.5 dB)
Low:
3.5"H (2U) x 19"W x 13.25"D
89mm x 483mm x 337mm
Net: 30 lbs. (13.6 kg)
Shipping weight: 36 lbs. (16.3 kg)
7 LED indicators per channel
1 green - READY, 5 yellow - SIGNAL,
1 red - CLIP/PROTECT
0° to 50° C, up to 85% RH
240 Watts per channel into 8 Ohms from
20 Hz to 20 kHz, with no more than 0.2% THD
325 Watts per channel into 4 Ohms from
20 Hz to 20 kHz, with no more than 0.2% THD
700 Watts into 8 Ohms at 1 kHz, with no
more than 0.2% THD
43.8 V line voltage per channel into 8 Ohms
36.0 V line voltage per channel into 4 Ohms
2.0 dB nominal
5 Hz to 40 kHz (+0, -3 dB)
20 Hz to 20 kHz (±0.75 dB)
> 65 dB @ 1 kHz; > 55 dB @ 10 kHz
25k Ohms unbalanced, each leg to ground,
50k Ohms balanced
83 mVrms for 1 W into 4 Ohms
1.5 Vrms for rated power into 4 Ohms,
160 mVrms for 1 W into 4 Ohms @ 1 kHz
27.6 dB (±0.5 dB)
7