EMl-31061A
5. LEVEL ADJUSTMENT
5. LEVEL ADJUSTMENT
5. LEVEL ADJUSTMENT
Set the scale on a stable and level surface. Level the scale by
turning the adjustable legs so that the air
bubble is inside the
center circle.
NOTE:
The
attached
position
of fhe level gauge
differs
according
to model.
Level Gauge
Correct
Incorrect
When the air bubble moves toward the left
When the air bubble moves toward rear,
turn
side, turn the right adjustable legs clockwise.
the front adjustable legs clockwise.
6. INSTALLING
THE REMOTE
PIPE
(for remote
display type with pipe only)
1.
Remove the clamp and detach the remote display
from the remote stand.
NOTE:
Be careful
NOT TO LOSE the clamp, screws
@ (FL-4 x25), and screw @I (FL-4 x8).
Remole
Sland
5- 1