Lock The White Balance - Toshiba TLP780U Owner's Manual

Lock the white balance

Camera control panel
W.BALANCE OVERLAY ARM LIGHT
LOCK
CAMERA CAMERA
GAIN
2
This projector's camera is always being adjusted automatically for projected color
balance;
however, the balance can shift away from optimal due to the color scheme of the
document. Should this occur, the white balance can be set to a fixed condition by
using the following procedure.
1
Project a white paper and enlarge it to fill the
screen.
2
W.BALANCE
Press W.BALANCE to turn the LOCK indicator
LOCK
on.
The white balance is locked.
To release the white balance, press W.BALANCE again to
turn the LOCK indicator off.
Notes
• If you raise up the arm while the camera input is selected, the color of the picture may vary
for an instant due to the automatic white balance adjustment. This is not a malfunction.
• If you put back the arm and raise it up while the white balance is locked (the LOCK indicator
is lit), the projector releases the white balance.
• Should this be the case, or if you would like to adjust to a desired tint, adjust "R-level", "G-
level" or "B-level" on the FULL MENU [Color] screen.
60
CONTENTS