Table of Contents
Advertisement
Before calling service personal (continued)
Symptom
The color is faint.
• The "Color", "Tint", "R-Level", "G-Level" or "B-Level" adjustments
The tint is not good.
are not correct.
• The lamp life is ending.
The remote control does not
• The remote control is not facing the remote sensor.
work.
• The remote control is too far away.
• There is an obstruction between the remote control and the
remote sensor.
• The batteries are exhausted.
Mouse function cannot be used
• The USB cable is not properly connected.
from the remote control unit.
• The computer or OS is not compatible.
• The batteries are exhauste.
Document camera image is
• The lens is dirty.
blurry.
• The picture is out of focus.
• The light is not on.
Document camera image
• Image is being affected by fluorescent light in the room.
flickers.
Document camera image
• The image's number of frames is low. This is not a malfunction.
movement is awkward.
Horizontal stripes appear
• The image's number of frames is low. This is not a malfunction.
when document projected with
the document camera is
moved.
Cause
Correction
Make the "Picture" adjustments.
Replace the lamp.
Face the remote control transmitter toward the remote
sensor on the projector.
Operate within about 5 meters.
Remove the obstacle.
Replace the batteries.
Connect the USB cable properly.
The remote control mouse function is not available.
Replace the batteries.
Clean the lens with a blower or lens cleaner, etc.
Focus the picture by turning the focus ring.
Turn on the light.
Set the shutter speed on the menu screen.
69
CONTENTS
Page
48
66
16
16
–
15
42
–
15
65
57
56
45
Advertisement
Table of Contents
