Specifications; Stihl Msa 194 T Chainsaw; Chain Sprockets And Chain Speeds; Minimum Groove Depth Of Guide Bars - Stihl MS 194 T Instruction Manual

English

19 Specifications

19.1 STIHL MSA 194 T Chainsaw

– Displacement: 31.8 cm³
– Engine power to ISO 7293: 1.4 kW (1.9 bhp)
– Idle speed to ISO 11681: 3,000 ± 50 rpm
– Approved spark plug: NGK CMR6H from STIHL
– Electrode gap: 0.5 mm
– Dry weight without guide bar and chain 3.3 kg
– Max. fuel tank capacity: 270 cc (0.27 l)
– Max. oil tank capacity: 220 cc (0.22 l)

19.2 Chain Sprockets and Chain Speeds

The following chain sprockets may be used:
– 6-tooth for 3/8" P
– Maximum chain speed according to ISO 11681:
26.0 m/s
– Chain speed at maximum power:
18.6 m/s
– 8-Tooth for 1/4" P
– Maximum chain speed according to ISO 11681:
23.6 m/s
– Chain speed at maximum power:
16.9 m/s

19.3 Minimum Groove Depth of Guide Bars

The minimum groove depth depends on the pitch of the
guide bar.
– 3/8" P: 5 mm
– 1/4" P: 4 mm
36

19.4 Noise and Vibration Data

– Sound pressure level L
p
ISO 22868: 100 dB(A) K-value (uncertainty) for noise
pressure level is 2 dB(A).
– Sound power level L measured according to ISO 22868:
w
112 dB(A) K-value (uncertainty) for sound power level is 2
dB(A).
– Vibration level ahv, eq measured according to ISO 22867
– Handlebar: 3.6 m/s² K-value (uncertainty) for vibration
level is 2 m/s².
– Top handle: 3.6 m/s² K-value (uncertainty) for vibration
level is 2 m/s².
For further details on compliance with Vibration Directive
2002/44/EC visit www.stihl.com/vib.

19.5 REACH

REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.

19.6 Exhaust Emissions

The CO value measured in the EU type approval procedure
2
is specified at www.stihl.com/co2.
The measured CO value was determined on a
2
representative engine in accordance with a standardized
test procedure under laboratory conditions and does not
represent either an explicit or implied guarantee of the
performance of a specific engine.
The applicable exhaust emission requirements are fulfilled
by the intended usage and maintenance described in this
instruction manual. The type approval expires if the engine
is modified in any way.
19 Specifications
measured according to
0458-568-0121-A