How To Use The Output Connector; Computer Out Connector - Toshiba TLP-261 Owner's Manual

How to use the output connector

You can output analog RGB signal to a computer monitor, etc.
Check that the power supplies for the projector and for the computer are off before connecting the cables.
CONTROL USB AUDIO IN
Notes
• The analog RGB signals or Y/P
• Signals are output from the COMPUTER OUT connector even when in the standby mode.
• A general computer monitor may not display a normal picture with Y/P
COMPUTER OUT COMPUTER IN
VIDEO IN S-VIDEO IN
(Y/P ) (Y/P )
B /P R B /P R
To COMPUTER OUT connector
Be sure to connect in the
proper direction.
/P signals of the COMPUTER IN connector are output from the COMPUTER OUT connector.
B R
Computer monitor, etc.
/P signals.
B R
27
CONTENTS