Adjusting The Audio Quality; Using The Sub-Bass System (Sbs); Using The Stablesound Feature - Toshiba 56HM195 Owner's Manual

Adjusting the audio

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate Select CH RTN Back EXIT
3. Press z or y to highlight the item you want to adjust
(Bass, Treble, or Balance).
Audio Settings
Bass 100
Treble 100
Balance 0
SBS On
SBS Level 85
StableSound Off
Reset Done
4. Press x or • to adjust the level.
• x makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
• • makes the bass or treble stronger or increases the balance
in the right channel (depending on the item selected).
5. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.

Using the sub-bass system (SBS)

The sub-bass system allows you to enhance bass performance,
even when the volume is low.
To turn on the SBS and adjust the level:
1. Press MENU and open the Audio menu.
2. Highlight Audio settings and press ENTER.
3. In the SBS field, select On.
4. Press y or z to highlight SBS Level, and then press x or •
to adjust the sub-bass system.
Audio Settings
Bass 100
Treble 100
Balance 0
SBS On
SBS Level 85
StableSound Off
Reset Done
Chapter 8: Using the TV's features
(continued)
Exit
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
5. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
To turn off the SBS:
Select Off in step 3.
Using the StableSound
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound ®
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate Select CH RTN Back EXIT
3. In the StableSound field, select On.
Audio Settings
Bass 100
Treble 100
Balance 0
SBS On
SBS Level 85
StableSound On
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Note: The RESET function returns your audio adjustments to
the following factory settings:
Bass ............. center (50)
Treble .......... center (50)
Balance ........ center (0)
StableSound ... Off
To turn off the StableSound feature:
Select Off in step 3 above.
®
feature
feature:
Exit
85