Chapter 3: Using The Remote Control; Learning About The Remote Control - Toshiba 56HM195 Owner's Manual

3
Using the remote control

Learning about the remote control

The buttons used for operating the TV only are described here. For a
complete list of the remote control's functions, see the remote control
functional key chart on pages 29–30.
For a list of the buttons that operate the TV Guide On Screen
page 54.
turns the TV on and off. Press POWER to turn on the TV. The blue
POWER
LED indicator on the TV front will be illuminated. Press POWER again to
turn off the TV.
Note: The Quick Restart™ setting will affect the amount of time it takes for the
picture to appear when you turn on the TV. See page 51 for details.
accesses the sleep timer (page 91).
SLEEP
The first press of the LIGHT button lights the keypad and turns on
LIGHT
the Illumination mode. With the Illumination mode on, pressing any key
lights the keypad for 5 seconds (10 seconds if you're in programming
mode). Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
directly tune channels. The "–" button is used
Channel Numbers (0–9, –/100)
to tune digital channels (page 71) or to display the favorite channel list
(page 44).
selects the video input source (page 67).
INPUT
cycles through the six remote control device modes: TV, CBL/SAT,
MODE
VCR/PVR, DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 28).
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3,
PIC SIZE
and Full (page 72).
displays a list of available TheaterNet devices (page 45).
TheaterNet™ DEVICE
accesses the on-screen IR device control icons (page 46).
TheaterNet™ CTRL
accesses the main TV menu system (pages 35 and 36) or opens a
MENU
menu in the TV Guide On Screen
opens the TV Guide On Screen
TV GUIDE
provides detailed information on highlighted items in the TV Guide
INFO
™
On Screen system (Chapter 7).
activates highlighted items in the main menu system and the
ENTER
TV Guide On Screen ™ system.
When a menu is on-screen, these buttons select or
Arrow buttons (yz x •)
adjust programming menus. (Also see
cycles through programmed channels when no menu is on-screen
CH yz
(page 42) and functions as page up/down when a menu is on-screen or when
the TV Guide On Screen ™ system is open (Chapter 7).
26
™
system, see
™ system (Chapter 7).
™
system (Chapter 7).
x / • on the next page.)
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Note: The error message "Not
Available" will appear if you press a
key for a function that is not available