Pop (Picture-Outside-Picture) - Toshiba TheaterWide 44NHM84 Owner's Manual

PIP (Picture-in-Picture) / Twin Picture Operation
Selecting PIP / Twin Picture Channels
Press the PIP button on the remote control to select PIP or Twin picture mode.
1
Select the Ant/Cable source with the PIP INPUT button.
2
Use the PIPCH-/PIPCH+ button to select a channel for the sub picture.
Swapping Pictures
Press the SWAP button.
Each time you press the SWAP button, you switch the Main and Sub pictures.
It's available to SWAP the Main and Sub picture in Ant/Cable, video 1-2, and front video input sources for Main picture.
Main Picture Sub Picture
Moving the PIP Picture (PIP mode only)
In the PIP mode, each press of the UP/DOWN/LEFT/RIGHT arrow buttons will
move the PIP picture to a different position on the screen.

POP (Picture-outside-Picture)

Use POP to search the pictures of all the programmed chan-
nels one-by-one on the 3 POP screen display, while the main
screen remains the current channel.
Press PIP button on the remote control
1
with the POP image on the screen to acti-
vate POP (Picture-outside-Picture) mode.
The pictures of all the programmed chan-
nels are searched with the 3 POP screen, as
shown to the right.
• Press SWAP, to enlarge the selected
channel being searched on the POP
screen to view it on the Main screen.
(It's available to use this function in
Ant/Cable input source for Main and PIP
picture.)
2
Press the EXIT button to exit POP mode.
W
Run Ch. Scan channel search before using POP mode.
Main Picture Sub Picture
P A G E 2 9