Connecting A Camcorder; Connecting An Audio System - Toshiba 50A10 Owner's Manual

Connecting a camcorder

This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one pair of audio cables
• one video cable

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, then
turn off the built-in speakers. (See" Turning off the built-in speakers"
on page 39.)
You will need one pair of audio cables.
Amplifier
TV
S-VIDEO
VIDEO
L/ MONO
AUDIO
R
Camcorder
VIDEO AUDIO
OUT
L
R
LINE IN
L R
AUDIO CENTER
CHANNEL IN
ANT( 75 )
ON OFF
OUT
VAR
R L
AUDIO
Y VIDEO
L/
L
C
B MONO
AUDIO AUDIO
C
R
R R
COLOR
STREAM
VIDEO 1 VIDEO 2
INPUT
IN DVD IN OUT
Caution:
If you are using an S-VHS camcorder with an
S-video output, connect this to the S-video
input on the TV and omit the video cable.
Do not connect the video cable and the
S-video cable to Video-3 simultaneously.
TV
Note:
To hear the audio, the volume of both the TV
and the external audio amplifier must be set
above minimum (zero). For example, if you
set the volume of the TV to zero, you will not
be able to hear any audio, even if you adjust
the volume of the amplifier to the maximum
setting.
9