Siemens SIPART DR19 Quick Reference page 90

Program Controller
CLPA - Clock parameter list
Parameter/function
Program selection
Comparison at end of interval
with stop function
Clock format
Time intervals,
Program 1 (10 intervals)
Time intervals,
Program 2 (5 intervals)
Analog values at end of interval
in program 1
Analog values at end of interval
in program 2
Program 1
Digital output signal Clb1 during
intervals 1 to 10
to
Digital output signal Clb6 during
intervals 1 to 10
Program 2
Digital output signal Clb1 during
intervals 1 to 5.
to
Digital output signal Clb6 during
intervals 1 to 5.
90
Indicator Indicator PV-X
SP-W
Param. Parameter setting
name
PrSE P1 only program 1
P2 only program 2
P1.P2 P1 or P2 Switchover via signal
PU (DI)
CASC P1 and P2 cascaded
Hold oFF, 0,1 ...10
[given% of dA, dE]
CLFo h.' Hrs, Min
'." Min, Sec
t.01.1 00.00 to 23.59 or
to t.10.1 00.00 to 59.59
t.01.2 00.00 to 23.59 or
to t.05,2 00.00 to 59.59
A.01.1 -10% to +110%
to A.10.1 of dA, dE, nop
A.01.2 -10% to +110%
to A.05.2 of dA, dE, nop
1.01.1 Lo/Hi
to x.PE.x status of the digital outputs at the
1.10.1 end of the program and at the start of the
1.PE.1 program in the start position.
to
6.01.1 Lo/Hi
to x.PE.x status of the digital outputs at the
6.10.1 end of the program and at the start of the
6.PE.1 program in the start position.
1.01.2 Lo/Hi
to x.PE.x status of the digital outputs at the
1.05.2, end of the program and at the start of the
1.PE.2 program in the start position.
to Lo/Hi
6.01.2 to x.PE.x status of the digital outputs at the
6.05.2, end of the program and at the start of the
6.PE.2 program in the start position.
Quick Reference
Factory
setting
P1
oFF
h . '
00.00
00.00
0.0
0.0
Lo
Lo
Lo
Lo
SIPART DR19
C73000-B7474-C140-06