Setting The Appletalk Protocol - Toshiba TEC B 452 User Functions Manual

3.SETTING NETWORK FUNCTIONS (Cont.)

Setting the AppleTalk Protocol

The AppleTalk protocol must be enabled and properly configured to enable AppleTalk printing with the
Macintosh computer.
1
Press the [NETWORK] button in the ADMIN menu.
4
• The NETWORK menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
2
Press the [APPLETALK] button.
• The APPLETALK screen is displayed.
3
Specify following items as required.
• ENABLE APPLETALK — Press the [ENABLE] button to enable the AppleTalk, or [DISABLE] button to disable
the AppleTalk.
• [DEVICE NAME] — Press this to enter the AppleTalk name of this equipment.
• [DESIRED ZONE] — Press this to enter the AppleTalk zone name this equipment joins. If your AppleTalk net-
work has not been configured with a zone, you do not have to enter the zone name.
112
4.SETTING ITEMS (ADMIN)
P.82