Tips And Tricks; Troubleshooting - Motorola HK200 Quick Start Manual

English

Tips and tricks

Restore to factory settings
Caution: This action erases all pairing information stored in your headset.
To restore your headset to original factory settings:
1 Turn your headset turned off
2 Press and hold both Volume button and Call button together and turn your
headset on – wait until the indicator light is steady blue.

Troubleshooting

My headset will not enter pairing mode
Make sure that any devices previously paired with the headset are turned
off. If the indicator light is flashing in blue, first turn off the other device,
then turn the headset off and on. The indicator light becomes steadily lit in
blue and, on models supporting voice prompts, you will hear "ready to pair".
My phone doesn't find my headset when searching
Make sure the indicator light on your headset is steadily lit in blue when
your phone is searching for devices. If not, press and hold the Call button
and the Volume button while turning the power on until you see the indicator
light steady blue and, on models supporting voice prompts, until you hear
"ready to pair".
10