Advertisement
Quick Links
At a glance
the important bits, quick and easy
Power
Switch
O
On
Wear
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset.
Note: Fully charge before use.
Connect & go
let's get you connected
1
Turn Bluetooth on.
T
4
Complete.
Voice prompt:
"pairing complete"
Tip: For daily use, just make sure your headset is on,
and your phone's Bluetooth feature is on. Your headset
and phone connect automatically.
Basics
standard features, advanced quality
Calls
To...
make a voice
dial call
redial last call
mute or
unmute
end a call
Note: Some features are phone/network dependent.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
Note: may cause distraction and may be illegal. Always
obey the laws and drive safely.Using a mobile device or
accessory while driving.
Status light
An easy way to check your headset.
status light
two blue flashes
rapid blue flashes
slow blue flash
steady red
steady purple
steady blue
Help & more
• Get help: Visit www.motorolahome.com/support
• Find accessories at: www.motorolahome.com
Manufactured, distributed, or sold by Binatone Electronics
International LTD., o icial licensee for this product. MOTOROLA and
the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC. and are used under license.
Apple logo is a trademark of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc. Google
Play and Android are trademarks of Google Inc.
All other trademarks are the property of their respective owners.
© 2016 Motorola Mobility LLC. All rights reserved.
Product ID: MH002
Bluetooth ID: MH002
FCC ID: VLJ-MH002
IC ID: 4522A-MH002
HK255
User Guide
Charge
(MicroUSB)
Ear
Cushion
Earpiece
Earhook
2
On
3
Enter passcode.
Press the Call button
hear a tone.
Press and hold the Call button
until you hear a tone.
Press and hold the Volume button .
Press the Call button
Call
Button
Status
Light
Turn headset on (charge before use).
On
Status Light - Blue
Voice prompt: "Welcome to
HK250. Battery level is
<level>. Ready to pair."
Follow voice prompts.
Enter "0000"
if prompted.
headset
turning on
connecting to your device
connected to your device
charging - low battery level
charging - mid battery level
charging - battery full
EN
Connections
Phone
Tablet
Computer
Calls
Music
Volume
Press in
to adjust
and you
.
Advertisement
