Samsung S630 Service Manual page 60

9) CCD DEFECT ADJ
After changing the MAIN PCB and CCD, adjust the DEFECT CELL of CCD.
< How to adjust >
a...Download program file and save it to SD memory card.
b...Turn on the camera.
c...Adjustment will be done automatically.
d...After completing the upgrade, the camera is turned off automatically.
< Description of TXT file >
When making or modifying the program, see the following program codes.
When modify the program, use the Memo Pad of Windows and save it as "STS373ADJ.txt"
// PM Batch Test 8 //
// adj control
adj_control check_process_id 65535
adj_control set_process_id 65534
adj_control save_e2prom 1 // save eeprom
adj_control save_data_file 1 // save csv...
adj_control save_process_pass 1
adj_control batch 1 // enable 8 adj...
adj_control osd_delay 0
adj_control signal 500// start signal
//adj_control signal 300// start signal
//adj_control signal 300// start signal
//================================#2. CCD Defect Cell
//start adj_defective_pixel
//adj_control check_process_id 65535
//adj_control save_e2prom 1
//adj_control save_data_file 1
// OSD Disable
67
Ⅲ. ADJUSTMENT