Included Components; Mounting Instructions; Optional Accessories - Shure Axient AXT630 Manual

Antenna distribution system
Hide thumbs Also See for Axient AXT630:
Table of Contents

Advertisement

AXT630, AXT631 and AXT632 Antenna Distribution Systems
Antenna Distribution Systems send the RF signal from a single pair of antennas to multiple receivers. Ultra-linear amplification and adjustable attenuation
optimize performance in difficult RF environments. Selectable input filters match the available frequency bands of transmitters, providing extra protection
from strong out-of-band signals. BNC antenna output pairs distribute band-filtered signals to up to 4 receivers. A pair of wideband cascade ports supply wide-
band RF signals to Spectrum Managers or additional antenna distribution amplifiers. Networking allows Wireless Workbench to control filtering ranges and
attenuation.
To maximize use of the RF spectrum, Antenna Distribution Systems are available in the following frequency ranges:
• AXT630 (470-698 MHz)
• AXT631 (606-814 MHz)
• AXT632 (470–787 MHz)
Note:Instructions in the system guide apply all models of Antenna Distributions Systems in this guide.
Features
• Selectable input filtering provides system-wide protection against strong out-of-band signals
• Wideband filtering option covers multiple bands
• Up to 15 dB of selectable RF attenuation for signal-to-noise optimization
• Front panel interface and Wireless Workbench 6 software control provide easy setup and control of filtering, antenna power, and attenuation
• BNC outputs: 4 antenna output pairs
• Wideband RF cascade port with selectable 3 dB make-up gain for connecting wideband devices
• Ethernet Networking: 2 PoE enabled Ethernet ports
• IEC power ports enable daisy-chaining of AC power

Included Components

2-foot Coaxial Antenna Cable (RG-58) (12)
IEC AC Power Cable (1)
IEC AC Extension Cable (1)
Shielded 3-foot Ethernet Cable (1)
Shielded 8-inch Ethernet Jumper Cable (1)
Hardware Kit (1)
22-inch Coaxial Cable* (1)
33-inch Coaxial Cable* (1)
*with integrated bulkhead for front mounting antennas.

Optional Accessories

1/2 Wave Antennas
(744-865 MHz)
UA820G
(690-746 MHz)
UA820H4
(554-590 MHz)
UA820J
(606-666 MHz)
UA820K
(638-698 MHz)
UA820L3
(694-758 MHz)
UA820M
(740-814 MHz)
UA820Q
(710-790 MHz)
UA820P8
Cables
25-foot Coaxial
UA825
Cable RG8/X
50-foot Coaxial
UA850
Cable RG8/X
100-foot (30.4 m)
UA8100
Antenna Extension
Cable
UA802
95A9128
95A9129
C803
C8006
90XN1371
95B9023
95C9023
1

Mounting Instructions

This component is designed to fit into an audio rack.
WARNING: To prevent injury this apparatus must be securely attached to the rack.
Antennas
Passive Omnidirectional
Antenna (470-1100 MHz)
Passive Directional
Antenna (470-952 MHz)
PWS Helical Antenna
(480-900 MHz)
In-Line RF Amplifiers
(470-900 MHz)
UA830WB
(470-698 MHz)
UA830USTV
Active Directional Antennas
470-698 MHz
470-790 MHz
470-900 MHz
925-952 MHz
UA860SWB
PA805SWB
HA-8089
UA874US
UA874E
UA874WB
UA874X

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axient axt631Axient axt632

Table of Contents