Samsung SM-G973F Service Manual page 51

7. Level 2 Repair
5
Connect the SUB camera.
1) place the body tube and then assemble
Connector to PBA.
2) When Connector is assembled without PBA
fixed to Front Assy, Connector could be
crushed/damaged
※ Caution
When assembling Connector, be careful of cracks of chip
around.
Assemble REAR BTM(SPEAKER)'s bottom
7
1) Place REAR BTM's bottom at an angle to
assemble HOOK
2) Assemble left HOOK(SPK SUS's left)
3) Assemble right Hook.
※ Caution
1) When placing SPK, be careful of Hook's falling out. Check if
Hook comes off after assembling Hook.
2) Don't forcefully assemble Hook when it came off (could
damage Hook).
3) During SPEAKER's assembly, no Battery crush, dent,
scratches.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
`
6
Use a manual assembler to assemble the
screw at the PBA 3 point.
※ Torque Value : 1.3kgf±7%
(1.2~1.4, 3M Patch)
※ Caution
1) Be care of scratch and REAR damage
2) Check for contact damage.(red area)
8
Assemble REAR Top. Place(at an angle) and
assemble REAR TOP's top Hook (Gently)
1) Assemble REAR TOP's left Hook.
2) Assemble REAR TOP's right Hook.
※ Caution
1) Don't assemble HOOK forcefully with HOOK not inserted!
HOOK break, crush can happen)
2) When assembling REAR ASSY, no crush, dent, scratches
on Battery.