Samsung SM-G973F Service Manual page 50

7. Level 2 Repair
7-5. Assembly
1
Assemble the Main Cam.
Assemble each of Main Camera Connector
2 Points based on the PBA Connector.
※ Caution
1) Assemble it without Connector mold crushed
2) Check MAIN CAMERA connector (insertion/no insertion)
3
Assemble the PBA into the front.
1) Temporarily place PB's USB/bottom, right
C-CILP by putting them diagonally into the
Front, and place them by pressing the back
of USB terminal.
2) Check USB's left/right Holes match Boss
Tap Hole
3) Connect the battery connector and the UB
connector.
※ Caution
1) When assembling the PBA to the front, Be careful not to
touch IF bottom chip.
2) Be careful that C-CLIP located on the top is not damaged.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
2
Attach components on Front.
(RCV, Motor)
※ Caution
Be care of chip damage nearby screw point.
4
Assemble the Earjack.
1) Insert the Earjack diagonally.
2) Insert so that there is a clap.
3) Connect the Earjack connector.
※ Caution
Be careful of damage of Connector.