Cadillac Escalade 2020 Owner's Manual page 211

Cadillac Escalade Owner Manual (GMNA-Localizing-MidEast-13566599) -
2020 - CRC - 5/29/19
present and moved. See Approaching
and Following a Vehicle later in this
section.
Once ACC has resumed, if there is no
vehicle ahead, if the vehicle ahead is
beyond the selected following gap,
or if the vehicle has exited a sharp
curve, then the vehicle speed will
increase to the set speed.
Increasing Speed While ACC is at a
Set Speed
Do one of the following:
Use the accelerator to get to the
higher speed. Press SET down.
Release the control and the
accelerator pedal. The vehicle will
now cruise at the higher speed.
When the accelerator pedal is
pressed, ACC will not brake
because it is overridden. The ACC
indicator will turn blue on the
instrument cluster.
Press and hold +RES up until the
desired set speed appears on the
display, then release it.
To increase speed in small
increments, briefly press +RES up.
For each press, the vehicle speed
increases by 1 km/h (1 mph).
To increase speed in larger
increments, press and briefly hold
+RES up. For each press, the
vehicle speed increases by
5 km/h (5 mph).
When it is determined there is no
vehicle ahead or the vehicle ahead is
beyond the selected following gap, the
vehicle speed will increase to the set
speed.
The set speed can also be increased
while the vehicle is stopped.
If stopped with the brake applied,
press RES+ until the desired set
speed is displayed.
If ACC is holding the vehicle at a
stop and there is another vehicle
directly ahead, pressing RES+ will
increase the set speed. Pressing
RES+ when there is no longer a
vehicle ahead will cause ACC to
resume.
DRIVING AND OPERATING
Reducing Speed While ACC is at a
Set Speed
Do one of the following:
Use the brake to get to the desired
lower speed. Release the brake and
press SET . The vehicle will now
cruise at the lower speed.
Press and hold SET down until
the desired lower speed is reached,
then release it.
To decrease speed in smaller
increments, briefly press SET
down. For each press, the vehicle
speed increases by 1 km/h (1 mph).
To decrease speed in larger
increments, press and briefly hold
SET down. For each press, the
vehicle speed decreases by
5 km/h (5 mph).
To decrease speed while the
vehicle is stopped, press SET
until the desired set speed is
displayed.
211