Table of Contents
Advertisement
Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
indicates a reference page of this manual.
See the page in
DVD-V DVD-A
Basic playback
VCD
CD
Preparations
• Connect the AC adapter
player.
• When you want to view a disc on a connected TV or monitor
, turn on the equipment and select the video input
54
connected to the player.
• When you want to enjoy the sound of discs from an audio
system
, turn the audio system on and select the input
55
connected to the player.
• If you use the supplied remote control, make sure that
batteries are loaded in it.
• If you use the headphones, see "Connecting to
Headphones".
56
• Press the open switch to open the LCD monitor.
• Before using the player for the first time, remove the
protective sheet beneath the disc cover.
Press the open
switch and lift the
LCD monitor up.
Do not forcibly open the
LCD monitor to avoid
damaging this panel.
Disc cover
OPEN button
PLAY
PAUSE
VOLUME buttons
18
for details.
or the battery pack
16
60
15
TOP MENU
MENU
Power button
ENTER
/
/
/
STOP
CAUTION
• Keep your fingers clear of the disc as it is spinning.
Neglecting to may cause serious personal injury.
• Be careful not to catch your fingers in the disc holder.
• Do not use a cracked, deformed, or repaired disc.
• Do not tilt, shake or move the main unit while playing. It
may damage the disc.
1
Turn on the power.
to the
The player turns on, the POWER indicator on the
player front illuminates in green and the Power
button illuminates in blue.
The default setting for the language used to display
the OSD of the player is English. You can change
the language (English, French, Spanish, German,
Polish).
20
2
Open the disc cover.
The disc cover will not open over a certain range.
Do not force the cover open further, as it may
cause damage to the player.
3
Set a disc.
Place a disc with the playback side down, and
push gently on the center of the disc to affix it
to the spindle.
The player will be unable to recognize or
correctly play the disc if it is not affixed to the
spindle properly.
4
Close the disc cover.
Press CLOSE on the left corner.
Press POWER.
Press OPEN on the main unit.
The disc cover opens.
Advertisement
Table of Contents
