User's Manual
Character display
becomes garbled
during a
communication
You cannot receive
an incoming call
LAN
Problem
Cannot access LAN
Wake-up on LAN
9-24
In data transmission, make sure the parity bit
and stop bit settings correspond with those
of the remote computer.
Check the flow control and communication
protocol.
Check the rings before auto answer setting in
your communications application.
You can also use the ATS0 command. Refer to
the online help files for Appendix D, S-registers.
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
LAN jack and the LAN HUB.
Make sure the universal AC adaptor is con-
nected. The does not work Wake-up on LAN
function consumes power even when the system
is off.
If problems persist, consult your LAN
administrator.