Cisco Catalyst 9500 Series Hardware Installation Manual page 40

Rack-Mounting
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
Statement 1006
Figure 20: Rack-Mounting Brackets
This figure shows the standard 19-inch brackets and other optional mounting brackets. You can order the
optional brackets from your Cisco sales representative.
1
2
Cisco Catalyst 9500 Series Switches Hardware Installation Guide
32
19-inch brackets 3
Extension rails and -
brackets for four-point
mounting, includes
19-inch brackets.
Switch Installation
23-inch brackets
-